Gold Safety Award 2021
IPEC Inspection Ltd. are delighted to announce a Gold Safety Award for 2021. This further reinforces IPEC's commitment to Health & Safety for all our employees in the workplace. The [...]
NDT Technician Role
We are delighted to announce that we are now actively recruiting for the role of an experienced NDT Technician. Office Location: Cork, Ireland NDT Certification: Eddy Current Testing of Welds, [...]
Time of Flight Diffraction (TOFD)
Time of Flight Diffraction (TOFD) is a reliable method of advanced ultrasonic testing (UT) used in weld inspection. TOFD uses the "time of flight" of an ultrasonic pulse to find [...]
Phased Array Inspection
Phased Array Ultrasonic Testing (PAUT) is an advanced non-destructive examination technique that utilises a set of ultrasonic testing (UT) probes made up of numerous small elements, each of which is [...]
Eddy Current Testing
Eddy Current Testing (also commonly seen as eddy current testing and ECT) is one of many electromagnetic testing methods used in nondestructive testing (NDT) making use of electromagnetic induction to [...]
Ultrasonic Inspection
Ultrasonic Testing (UT) is within the family of non-destructive testing techniques based on the propagation of ultrasonic waves in the object or material tested. In most common UT applications, very short [...]
Ultrasonic Thickness Measurement
In the field of industrial ultrasonic testing, ultrasonic thickness measurement (UTM) is a method of performing non-destructive measurement (gauging) of the local thickness of a solid element (typically made of [...]
3D Scanning & Defect Analysis
IPEC Inspection & Creaform 3D 3D Corrosion Mapping of Gas Pipelines & Corrosion Assessment See link below for full transcipt & report; https://www.creaform3d.com/blog/adequate-corrosion-assessment-on-gas-distribution-pipelines Many thanks to all the [...]
Magnetic Particle Inspection
Magnetic particle Inspection (MPI) is a non-destructive testing (NDT) process for detecting surface and near-surface discontinuities in ferromagnetic materials such as iron, nickel, cobalt, and some of their alloys and [...]
Dye Penetrant Inspection
Dye penetrant inspection (DPI), also called liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied and low-cost inspection method used to check surface-breaking defects in all non-porous [...]
Hardness Testing
Hardness is a measure of the resistance to localized plastic deformation induced by either mechanical indentation or abrasion. In general, different materials differ in their hardness; for example hard metals [...]
Radiographic Inspection
Industrial Radiography (Radiographic Inspection) is a modality of non-destructive testing that uses ionizing radiation to inspect materials and components with the objective of locating and quantifying defects and degradation in material [...]
Looking to get started in NDT?
We are delighted to announce that we are now actively recruiting for the role of an "NDT Assistant / Apprentice Technician" If interested in the role, please send an email [...]